Home Bots & BusinessESAB Introduces ROBBI AI Cobot System for Automated MIG and TIG Welding

ESAB Introduces ROBBI AI Cobot System for Automated MIG and TIG Welding

by Pieter Werner

ESAB has introduced ROBBI AI, a collaborative robotic welding system that uses artificial intelligence, camera technology and laser sensing to automate MIG and TIG welding operations. The system is designed to assess welding conditions, generate weld paths and adjust welding parameters in real time without requiring operators to manually program robot movements.

Unlike conventional robotic welding systems that follow predefined paths and welding sequences, ROBBI AI uses physical AI to evaluate joint conditions and determine welding movements based on sensor data. The technology is intended for manufacturing applications involving variable joint fit-up, low-volume production and frequent changes in workpiece configurations.

ROBBI AI can operate with EWM Titan XQ, EWM Tetrix XQ and ESAB Aristo Edge welding power sources. Target applications include pipe fabrication, TIG welding and other processes that require skilled welders and can be difficult to automate using conventional robotic systems.

The system uses camera and laser sensors to identify welding joints and determine the appropriate weld path. Operators position the cobot at or near the joint and enter parameters from the applicable welding procedure specification (WPS), including material type, consumables and weld configuration. The system then evaluates the joint and initiates welding within the specified operating parameters.

During welding, ROBBI AI can modify travel movements, oscillation patterns and welding parameters in response to changes in joint geometry. For example, variations in joint gaps can trigger adjustments to the welding process without requiring the operator to reprogram the robot.

“Instead of programming every movement and anticipating every possible variation, ROBBI AI assesses the joint, determines how to proceed and can make adjustments while welding,” said Dan Colvin, Vice President, Advanced Technology Solutions at ESAB.

The system also supports conventional collaborative robot operation, allowing operators to disable the AI functionality and use traditional programming methods when required.

ROBBI AI incorporates a learning function that uses data from completed welds to improve its ability to identify welding conditions and respond to potential defects. The system undergoes simulation-based training before deployment and continues collecting welding data and video recordings during operation.

When the system detects conditions that could affect weld quality, it can stop the welding process. Operators can review the recorded data to investigate defects and provide feedback for subsequent welding operations.

AI processing takes place locally on a computer installed at the customer’s facility, rather than relying on continuous cloud connectivity. This configuration allows welding decisions to be processed onsite while keeping collected operational data within the facility.

ESAB also integrates its InduSuite software to help maintain AI-controlled welding operations within established welding procedure specifications and qualification requirements. The software is intended to prevent automated adjustments from exceeding approved welding parameters.

The ROBBI AI system uses a Universal Robots UR10e or UR20e collaborative robot arm. Available configurations include a seventh axis to extend the robot’s working range and a wheeled cart that allows the equipment to be moved between workstations.

The compatible EWM Titan XQ power source supports conventional, pulsed and advanced welding processes, including EWM React technology, which controls wire movement and droplet transfer. According to ESAB, the process can achieve welding speeds up to 100% faster and reduce heat input by 35% compared with conventional short-arc welding.

For TIG applications, the EWM Tetrix XQ range provides DC and AC/DC welding capabilities with conventional and pulsed operating modes. The machines can be combined with EWM’s tigSpeed Drive 45 wire-feeding system, which continuously supplies filler material to the welding point.

The tigSpeed system supports both cold-wire and hot-wire feeding. In hot-wire operation, the filler material is preheated before entering the weld pool. ESAB states that this configuration can increase deposition rates by up to 60% compared with manual TIG welding.

The Aristo Edge 500R is another compatible power source. ESAB’s Edge welding platform includes specialized welding processes such as Advanced Pulse, CRAFT and SPEED, while configurations within the Warrior Edge range provide additional modes for thin materials, root passes and pipe welding.

ROBBI AI is intended for manufacturing environments where part variation and changing production requirements limit the use of conventional robotic welding. Potential applications include pipe fabrication for data centers and infrastructure projects, as well as TIG welding operations that depend on specialized welding skills.

Misschien vind je deze berichten ook interessant